This method is a great option if you do not have a transducer scupper hole moulded into your kayak and you do not want to use a transducer arm over the side of the kayak. In-Hull transducer installation can be used with plastic and fibreglass kayaks. You will require a Waterproof Cable Seal to route the wiring from the inside of the kayak to the outside where the fish finder will be mounted.
Hi would love a little help. Iv fitted Transducer in hull of kayak. I'm brand new to kayak sea fishing. I tryed my best to fit it like you have in your video. Every thing works, but not been out on the sea yet. In my front room I'm getting blue colour top level then yellow red then the rest of the screen down to the bottom is blue. I'm trying to catch any faults so my first time out at sea, the fish finder will work properly. I know I won't get the same reading out at sea but the first blue line worries me. Would air bubbles on the clear mastic cause the blue line at the very top of the fish finder.
No it won't be the mastic, it won't work properly until you are in the water, that's what they are designed for. Cheers
Comments are closed.
Proudly associated with
Cornwall's only specialist kayak fishing shop
Add my blog to your feed reader by clicking the button below
Get blog updates via email
Kayak Fishing Videos
Custom feed reader powered by FeedWind
Cornish Shore & Kayak Fisherman
Penzance Kayak Fishing Meet Info
Saltwater Kayak Fisherman